• Thermex® and/or VT-Therm®
    • Temperature indexes up to 240°C for electrical and magnet coils, transformers, motors, small industrial and wind turbine generators.
  • Thermibond®
    • Self-bonding wires that enable the motor or generator manufacturer to avoid using impregnation varnishes and thus to reduce manufacturing time cycles.

 

  • Copper
    • cross section range:  from 1.50mm² up to 100 mm², subject to thickness and width ratio.
  • Aluminium
    • cross section range: from 10mm² up to 100mm². The lower range is still going to be extended.

 

Advantages:

  • Different types of enamel with very good mechanical strength and bonding properties
  • Very consistent quality and dimensional tolerances per industry standard
  • Wide range of dimensions (very small to very large flatwire cross sections)

roun-d-wires

Technical Data Sheets:

33.C.F.0001 rev 231003SJ_CU_FLAT_Thermex_220

33.C.F.0002 rev 231003SJ_CU_FLAT_Thermex_220_G3

33.C.F.0003 rev 231003SJ_CU_FLAT_Thermibond_TS

33.C.F.0004 rev 231003SJ_CU_FLAT_Thermex_240

33.A.F.0001 rev 231003SJ_ALU_FLAT_Thermex_220

33.A.F.0002 rev 231003SJ_ALU_FLAT_Thermibond_TS

  • Silix®: glass yarn covered and varnish impregnated 
  • Daglas: thermally fused yarn combination of glass and polyester fibers, available both unvarnished and varnished.
  • VTV: combination of mixed glass /polyester fibers and impregnated glass yarn.
  • VS: yarn covered with outstanding thermal and mechanical properties, based on polyamide-imide or polyimide enamel for the conductor insula-
    tion and the covering impregnation.

 

Our yarn covered wires are ideal for applications where the wire insulation requires
improved mechanical properties, for example in:

  • rotor and stator windings
    • electrical motors (low- and high-voltage)
    • traction motors
    • wind turbine generators
  • conductor strands or Roebel bars
    • large power generators (hydro, turbo)

 

THE ADVANTAGES:

  • Wires with improved mechanical strength
  • High-performance yarns and impregnation varnishes
  • Wide range of insulation builds possible: standard, very thin or reinforced
  • Own means of production for a broad range of round and flat enamelled wires

 

roun-d-wires


Technical Data Sheets:

34.C.F.0001 rev 231003SJ_CU_FLAT_Daglas

34.C.F.0002 rev 231003SJ_CU_FLAT_Enamel_Daglas

34.C.F.0003 rev 240118_AEH_CU_FLAT_Silix

34.C.F.0004 rev 231003SJ_CU_FLAT_Enamel_Silix

34.C.F.0005 rev 231003SJ_CU_FLAT_TX 220_G1_1_ Daglas

34.C.F.0006 rev 231003SJ_CU_FLAT-VTV

34.C.F.0007 rev 231003SJ_CU_FLAT_Enamel_VTV

34.C.F.0008 rev 231003SJ_CU_FLAT_VS_220

34.C.F.0009 rev 231003SJ_CU_FLAT_VS_220_VF

34.C.F.0010 rev 231003SJ_CU_FLAT_VS_220 Renf_

34.C.F.0011 rev 231003SJ_CU_FLAT_VS_240

34.C.F.0012 rev 231003SJ_CU_FLAT_VS_240 VF

34.C.F.0013 rev 231003SJ_CU_FLAT_VS_240 RENF

34.C.F.0014 rev 231003SJ_CU_FLAT_VS_240 ER

34.C.F.0015 rev 231003SJ__CU_FLAT_ 2FO_100_GL_300

34.C.R.0001 rev 231003SJ_CU_ROUND_Daglas

34.C.R.0002 rev 231003SJ_CU_ROUND_Enamel_Daglas

34.C.R.0003 rev 231003SJ_CU_ROUND_Silix

34.C.R.0004 rev 231003SJ_CU_ROUND_Enamel_Silix

34.C.R.0005 rev 231003SJ_CU_ROUND_VS_240 EF

34.C.R.0006 rev 231003SJ_CU_ROUND_ FO_150_GL_300

34.NC.R.0001 rev 231003SJ_CUNi_ROUND_ Nickel_ 2_Silix_ VSI

34.A.F.0001 rev 231003SJ_ALU_FLAT_Enamel_Daglas

34.A.F.0002 rev 231003SJ_ALU_FLAT_Enamel_Silix

 

 

 

 

See catalogue:

bare-aluminum-conductor

bobina-alu

UNE EN 60228

 

NOMINAL SECTION COMPOSITION DIAMETER (mm) RESISTANCE WEIGHT

APPROX.

(Ω/Km)  (Kg/Km)
6 7×1,05 3,02 3,080 54
10 7×1,34 4,15 1,830 90
16 7×1,70 5,10 1,150 144
25 7×2,13 6,50 0,727 225
35 7×2,50 7,50 0,524 308
50 7×2,94 9,00 0,387 420
19×1,77 9,00 415
70 19×2,13 10,90 0,268 600
95 19×2,62 11,40 0,193 820
19×2,52 12,90 830
120 19×2,95 13,00 0,153 1060
37×2,05 14,50 1070
150 19×3,24 14,40 0,123 1290
37×2,21 16,20 1290
185 37×2,50 18,00 0,099 1650
240 61×2,25 20,60 0,075 2190
300 61×2,52 22,70 0,060 2650
400 61×2,82 26,00 0,047 3395
500 61×3,20 29,20 0,037 4340

 

Material :
-Copper
-Aluminum

Sections: 
-Flat wire:  from 10×2 to 150x15mm
-Round: from 6 to 20mm
-Cable: from 6 to 300mm²


Highlighted Products

CTC
Stranded and solid wires
POLYIMIDE
vidrio glassGLASS YARN COVERED