• Thermex® and/or VT-Therm®
    • Temperature indexes up to 240°C for electrical and magnet coils, transformers, motors, small industrial and wind turbine generators.
  • Thermibond®
    • Self-bonding wires that enable the motor or generator manufacturer to avoid using impregnation varnishes and thus to reduce manufacturing time cycles.

 

  • Copper
    • cross section range:  from 1.50mm² up to 100 mm², subject to thickness and width ratio.
  • Aluminium
    • cross section range: from 10mm² up to 100mm². The lower range is still going to be extended.

 

Advantages:

  • Different types of enamel with very good mechanical strength and bonding properties
  • Very consistent quality and dimensional tolerances per industry standard
  • Wide range of dimensions (very small to very large flatwire cross sections)

roun-d-wires

Technical Data Sheets:

33.C.F.0001 rev 231003SJ_CU_FLAT_Thermex_220

33.C.F.0002 rev 231003SJ_CU_FLAT_Thermex_220_G3

33.C.F.0003 rev 231003SJ_CU_FLAT_Thermibond_TS

33.C.F.0004 rev 231003SJ_CU_FLAT_Thermex_240

33.A.F.0001 rev 231003SJ_ALU_FLAT_Thermex_220

33.A.F.0002 rev 231003SJ_ALU_FLAT_Thermibond_TS

 

WITH(mm) THICKNESS(mm) LENGHT(mm)
10 5 5000
15 5 5000
20 5 5000
25 3 5000
25 5 5000
30 3 5000
30 5 5000
40 5 5000
50 5 5000
50 6 5000
60 5 5000
80 5 5000
100 5 5000
120 5 5000
20 10 5000
30 10 5000
40 10 5000
50 10 5000
60 10 5000
80 10 5000
100 10 4000
120 10 5000
160 10 5000
50 15 5000

 

Material :
-Copper
-Aluminum

Sections: 
-Flat wire:  from 10×2 to 150x15mm
-Round: from 6 to 20mm
-Cable: from 6 to 300mm²

Material: 
-Copper
-Aluminum

Sections: 
-Flat wire: from 2×1 to 25x6mm
-Round: from Ø 0,5 to Ø 6mm
-Cables: from 5 to 150mm²

Insulation: 
-Paper, Aramid or enamelled between others

flat-cable

hf-litz

 

stranded_solid_wires


Highlighted Products

CTC
Stranded and solid wires
POLYIMIDE
vidrio glassGLASS YARN COVERED